가장 중요한 원인은 이물질 때문인 것 같다그러나 당신도 알다시피

가장 중요한 원인은 이물질 때문인 것 같다

그러나 당신도 알다시피, FSG에서 High End Seal의 재질을 변경하였다.
그래서 변경된 AP Grade로 적용하는 것을 제안한다.
온도 문제는 의심이 된다면 API 682 Cooler을 시범 적용해 보는 것도 한 방법이겠지만, 우리는 cooling 능력의 문제는 없다고 본다.

따라서 Cooling water 유량을 충분히 증가시키고, 이물질 유입을 차단하면 문제를 해결 할 수 있다고 보는데 일부 피팅 현상이 나타나므로 FSG의 변경된 AP 그레이드의 Carbon을 공급해 줄수는 있다.

당신의 검토를 부탁 합니다.

결과 (영어) 1:

The most important reason seems to be due to foreignHowever, as you know, in the High End Seal to change the material of FSG.So I changed to apply to Grade AP.If you suspect the temperature problem is API 682 Cooler to see the trial to apply, but we see that there is no problem of cooling ability.Therefore, the Cooling water flow increases enough, foreign body blocking the inflow could be seeing some changes to the status quo appears fitting FSG AP grade Carbon can supply.Thank you for your review.

결과 (영어) 2:

The most important cause is likely due to debris, but, you know, we changed the material of High End Seal at FSG. So, we propose to apply the changed AP Grade. Temperature problem seeing it applied to demonstrate the API 682 Cooler If in doubt yigetjiman be one way, we see that there is a problem of cooling capacity. Therefore, increase in fully Cooling water flow and, if you block the spill seeing that you can solve the problem, some fittings symptoms appear, so the Carbon Changed AP grade of FSG There is supplying Lines. Thank you for your review.

결과 (영어) 3:

the most important reason is because of the different material like

but you know, in the FSG will Seal End the texture changes. AP Grade changes, it is proposed to be used. the problem is, that the temperature to be applied to the 682 Cooler api it is also a way, but we have the ability to cooling problem; no water flow, Cooling.

the full increase.the water flow can be cut off, to solve the problem, but some rust symptoms, changes of FSG AP the garden to supply the Carbon.

you check out, please.