현재 우리는 도면을 수정하고 있다.수정 내용은 아래와 같다.1.

현재 우리는 도면을 수정하고 있다.
수정 내용은 아래와 같다.
1. Seal Drawing:
- Berrier Fluid
- Berrier Fluid 압력: 삭제 (일반적으로 기입하지 않음)
2. System Drawing
- 설계 온도 수정: 82-155
- Barrier Fluid 수정: Water+Glycol - Duraclear

우선 수정된 도면을 첨부하겠다.
EIS는 수정 작업을 진행중이고 내일 까지는 EIS에서 확인 할 수 있다.


수정된 도면은 내일이면 EIS에서 확인을 할 수 있을 것이다.

결과 (영어) 1:

Currently we are modifying the drawing.The modification follows.1. Seal Drawing: - Berrier Fluid -Fluid pressure Berrier: deleted (usually do not fill out)2. System Drawing -Design temperature correction: 82-155 -Fixed: Water + Glycol Fluid Barrier-DuraclearFirst of all I will attach the modified drawing.EIS until tomorrow and the modifications can be identified in the EIS.The revised drawings tomorrow you will be able to do OK in the EIS.

결과 (영어) 2:

We are now modifying the drawings.
Modifications are as follows:
1. Drawing Seal:
- Berrier Fluid
- Fluid pressure Berrier: deleted (usually not written)
2. Drawing System
- Modify the design temperature: 82-155
- Barrier Fluid modified: Water + Glycol - Duraclear. First, we will attach the corrected figures. EIS can be found in the EIS until tomorrow corrective action is underway and revised figures tomorrow. It will be able to check the EIS.

결과 (영어) 3:

at present, we have to modify the plan.
crystal content is as follows, 1. Seal Drawing:
-
- Berrier Berrier Fluid Fluid pressure: delete (usually do not fill in)
2. system design of temperature correction: Drawing
-
- Barrier of eight two - Fluid modified: Water Glycol - Duraclear

the revised drawings add. EIS, modified to work in progress. EIS tomorrow can check in.


the modified pattern is EIS tomorrow. check in can be.